How to use emla™

To ensure correct and effective use of emla cream, please follow the following steps as shown below.

Top tip! – Please make sure an appropriate occlusive dressing is used to cover the skin to maximise the absorption, and leave on the skin surface for adequate time (usually 60 minutes) ahead of the needle procedure.

Make sure that the area of the skin to be anaesthetised is clean and dry. Shave the area prior to application if necessary. Squeeze half a 5g tube of emla cream (about 2g) onto the procedure site, over an area the size of a 50p coin.

Take one of the occlusive dressings and remove the centre cut-out piece. Peel the protective paper away from the underside. Cover the emla cream with the dressing so that you get a thick layer underneath. Do not spread out the cream. Press down the edges firmly to avoid leakage.

Remove the paper frame. Write the time of application onto the dressing. emla must be applied at least one hour before the procedure and can be left in place for up to five hours for adults and four hours for children. The longer the cream stays on, the better the anaesthetic effect.

When ready for use, remove the dressing and wipe off excess cream with a tissue.

Please ensure the needle procedure is performed within the following four hours, but preferably as soon as possible after removal of the excess cream.

Back to top
 

C14499 March 2008